How to avoid the failure of the ultra-fine grinding machine?

Grinding equipment such as ultra-fine pulverizers will inevitably have various failures in use, and during the construction process, once the ultra-fine pulverizer is accidentally damaged during the grinding operation, the entire process will be caused. The process delays production. How can we avoid the failure of the superfine mill?

1.   Reduce the wear of wear-resistant parts of the ultra-fine pulverizer, and the feed should not be too large during the running-in period of the ultra-fine pulverizer, so as not to affect the normal state of the parts. The solution is to carry out reasonable feeding in strict accordance with the use standards.

2.  After the installation of the ultra-fine mill, there will be an empty machine for commissioning, and you can check whether the various parts are installed in place. If there is a deviation of geometric shape and matching size between the parts, it will be affected by alternating loads such as impact and vibration, as well as heat, deformation and other factors during use, which will affect the production efficiency of the ultrafine mill. Therefore, check the bolts of the ultra-fine mill at a fixed time to avoid loosening.

3.  The operator of the industrial pulverizing production line must have a clear understanding of the operation and principle of the equipment, and have an understanding of the performance, structure and parts of the ultrafine mill, and troubleshoot in time to reduce downtime. In addition, the lubrication of the ultra-fine pulverizer also has certain operational requirements. To match the operation of the assembly gap, the lubricant should form a uniform oil film on the friction surface to prevent wear.

Three points should be kept in mind during the use of the superfine mill: reduce wear, avoid looseness, and operate skillfully. Paying attention to these three points will avoid many unnecessary failures.