The details that need to be paid attention to when using the superfine grinder
The ultra-fine pulverizer adopts a unique design scheme. After improvement, the blade is no longer used, and the cutter head and liner are specially installed according to the design structure of the fuselage. In order to improve the grinding efficiency and effect, the ultra-fine pulverizer uses high-speed impact force and shear force to make the material in the grinding cylinder subject to the squeezing, kneading and tearing of the medium, which greatly shortens the grinding time and improves the grinding efficiency; At the same time, because the material is fluidized and each particle has the same stress state, its self-viscous effect can make the finished product form a uniformly dispersed and precise composite particle group, increase the density and increase the bioavailability, and improve the micro-grinding effect and technology.
When the ultra-micro grinder is working, the material to be grinded is fed into the machine from the feeding hopper on the side of the machine casing. It relies on the grinding roller device suspended on the plum frame of the main machine to revolve around the vertical axis. At the same time, it rotates on its own. The centrifugal force causes the grinding roller to swing outwards and press tightly on the grinding ring, so that the shovel blade scoops up the material to be sent between the grinding roller and the grinding ring, and the grinding roller achieves the purpose of grinding the material due to the rolling and rolling of the grinding roller.
Wind separation process: After the material is ground, the fan blows the wind into the main frame to blow up the powder, which is sorted by the classification device placed above the grinding chamber. The products that meet the specifications enter the cyclone collector with the wind flow, and are discharged through the powder outlet after being collected, which is the finished product. The wind flows back into the fan from the return duct at the upper end of the large cyclone collector. The wind path is circular and flows under negative pressure. The increased air volume of the circulating air path is discharged through the exhaust pipe between the fan and the main engine and enters the small cyclone collection. Refrigerator for purification treatment.
The ultra-micro grinding machine is composed of three parts: main machine, auxiliary machine, and electric control box. It has various properties such as winnowing type, no screen, no net, uniform particle size, etc. The production process is continuous. The ultrafine pulverizer has reached the international advanced level and is widely used in the pulverization of materials in the pharmaceutical, chemical, and food industries. The ultra-micro grinding machine is a horizontal tilting structure, composed of a base, a motor, a crushing chamber, a cover, and a feeding hopper. The feeding hopper and cover can be tilted to a certain angle, which is convenient for cleaning and repairing the material in the grinding chamber. For processing hard and difficult-to-grind materials, it can also be used as a supporting equipment for the previous process of micro-grinding. It is not restricted by the viscosity, hardness, softness and fiber of the material, and it can have a good grinding effect on any material. .
Precautions for ultra-micro grinding machine:
1. General medicinal materials do not need to be screened by the ultra-micro grinder, but for pearls and stalactites that require precise particle size, please pass the screen.
2. The ground material should be dried, especially the viscous material needs to be dried, so that the ultrafine grinder will have a better crushing effect. The volume should not be too large, about the size of a little finger nail.
3. Do not clean the grinding tank.
4. After using the superfine grinding machine, please unplug the power plug to avoid any danger caused by touching the switch.
5. When the speed slows down, please check whether the aggregate cloth tube of the superfine grinder is well ventilated, or there is too much material in the collecting cylinder. Turn off the power switch).